Библиотека 
Документация Turbotect 
 Технические статьи 
Публикации в прессе 
   

 

Print Version

Эта страница доступна только на английском языке. Приносим извинения за возможные неудобства.

You can read abstracts of the papers listed below. Copy of published technical papers are available on request from Turbotect or you can access selected papers on line through ASME digital store at http://store.asme.org. When you arrive on the ASME site, simply click on "Conference Papers". You can browse listings of papers, read abstracts, and purchase downloads for immediate delivery.

    Proceedings of the 2nd Middle East Turbomachinery Symposium, March 17-20, 2013, Doha, Qatar
    GAS TURBINE PERFORMANCE DETERIORATION AND COMPRESSOR WASHING
    By Cyrus B. Meher-Homji, Bechtel Fellow and Senior Principal Engineer, Bechtel Corporation, Houston, Texas, USA
    Andrew F. Bromley, Vice President, Operations, Turbotect (USA) Inc., Houston, Texas, USA
    Jean-Pierre Stalder, Chief Engineer and R&D Manager, Turbotect Ltd., Baden, Switzerland

    A full copy of the paper can be obtained from Turbotect or it can be downloaded (pdf) from the Texas A&M University website with the Adobe Reader Version 6.0 at:
    http://turbolab.tamu.edu/articles/


    39rd Turbomachinery Symposium, Turbomachinery Laboratory, Texas A&M University, October 4th to 7th, 2010
    GAS TURBINE FUELS—SYSTEM DESIGN, COMBUSTION AND OPERABILITY
    By Cyrus B. Meher-Homji, Bechtel Fellow and Senior Principal Engineer, Bechtel Corporation, Houston, Texas, USA
    Justin Zachary, Bechtel Fellow and Technology Manager, Bechtel Power Corporation, Frederick, Maryland, USA
    Andrew F. Bromley, Vice President, Operations, Turbotect (USA) Inc., Houston, Texas, USA

    A full copy of the paper can be obtained from Turbotect or it can be downloaded (pdf) from the Texas A&M University website with the Adobe Reader Version 6.0 at:
    http://turbolab.tamu.edu/articles/39th_turbomachinery_symposium_proceedings


    VGB PowerTech Magazine, November 2009:
    Refurbishment, Life Time Extension of Gas Turbine Hot Section Parts
    By Peter Huber, Turbotect Ltd.


    ASME Paper GT2009-59239
    The Fouling of Axial Flow Compressors - Causes, Effects, Susceptibility and Sensitivity
    Cyrus B. Meher-Homji and Mustapha Chaker, Bechtel Corporation, USA and Andrew F. Bromley, Turbotect (USA) Inc.
    June 2009, Orlando, Florida, USA


    ASME Paper GT2009-59356
    Analysis of Compressor On-Line Washing To Optimize Gas Turbine Power Plant Performance
    Ernst Schneider, Saba Demircioglu, Susana Franco and Dirk Therkorn, Alstom (Switzerland) Ltd.
    June 2009, Orlando, Florida, USA


    The Institution of Diesel and Gas Turbine Engineers Fourth Gas Turbine Conference of the Institution of Diesel and Gas Turbine Engineers
    Life Cycle Engineering, The Key to Successful and Profitable Power Plant Operation
    Peter A. Huber, Turbotect Ltd.
    November 2007, Milton Keynes, UK


    ASME Paper GT2007-28227
    On Line Compressor Washing On Large Frame 9-FA Gas Turbines, Erosion on R0 Compressor Blade Leading Edge, Field Performance with a Novel On Line Wash System
    Jos Oosting, Klaas Boonstra, Annemarie de Haan, Dick van der Vecht, Electrabel Nederlands nv, Eems Centrale, The Netherlands
    Jean-Pierre Stalder and Urs Eicher, Turbotect Ltd.
    May 2007, Montreal, Canada

    Best Paper Award
    The ASME - IGTI Industrial and Cogeneration committee presented a “Best Paper” award and a plaque to the authors of this paper GT2007-28227. The award was presented at the ASME Gas Turbine Technical Congress, Exposition; ASME TURBO-EXPO 2008: Power for Land, Sea and Air, 9-13 June 2008 in Berlin, Germany. This paper was presented in the 2007 ASME Turbo-Expo conference held in Montreal Canada and was deemed to be of high quality and of value to end users covering an important ongoing issue with large F-Class turbines.

    For a complete copy please feel free to contact us.


    33rd Turbomachinery Symposium, Turbomachinery Laboratory, Texas A&M University
    Gas Turbine Axial Compressor Fouling and Washing
    Cyrus B. Meher-Homji, Bechtel Corporation, USA
    Andrew F. Bromley, Turbotect (USA), Inc.
    September 2004, Houston, Texas
    The full paper can be downloaded (pdf) from the Texas A&M University website with the Adobe Reader Version 6.0 at:
    http://turbolab.tamu.edu/pubs/Turbo33/T33pg163.pdf


    ASME Paper GT2003-38691
    Firing Low Viscosity Liquid Fuels in Heavy Duty Gas Turbines
    Jean-Pierre Stalder and Phil Roberts, Turbotect Ltd.
    June 2003, Atlanta, USA


    Power-Gen Asia 2002
    Key Considerations When Embarking on a Heavy Fuel Project
    Michel Molière, GE Power Systems
    Peter Huber, Jean-Pierre Stalder and Andrew F. Bromley, Turbotect Ltd.
    October 2002, Singapore


    ASME Paper 2001-GT-74
    Daesan Combined Cycle Power Plant,Successful Operating Experience on Low Sulphur Waxy Residual Fuel Oil
    Koen-Woo Lee, Hwan-Doo Kim, & Sung-Il Wi, Hyundai Heavy Industries Co. Ltd.
    Ulsan, Daesan, Korea
    Jean-Pierre Stalder,Turbotect Ltd.
    June 2001, New Orleans, USA
    October 2001, Shenzhen, China (Asia Pacific Symposium on Gas Turbine Power Generation and Fuel Conversion Technology by the ASME Intl. Hongkong Section & the Chinese Association for Gas Turbine Power Generation, CAGTPG)


    ASME IJPGC2001/PWR-19148
    Salt Percolation Through Gas Turbine Air Filtration Systems and its Contribution to Total Contaminant Level
    Jean-Pierre Stalder,Turbotect Ltd.
    Joël Sire, Serma Technologies, Belfort, France
    June 2001, New Orleans, USA


    Baltica V - 2001
    Life Cycle Engineering, the Key for a Successful and Profitable Power Plant Operation
    Peter A. Huber, Turbotect Ltd.
    June 2001, Porvoo, Finland


    ASME Paper 00-GT-138
    Use of Chromium Containing Fuel Additive to Reduce High Temperature Corrosion of Hot Section Parts
    Jean-Pierre Stalder and Peter A. Huber, Turbotect Ltd.
    May 2000, Münich, Germany


    Gas Turbine Fuel Washing Theory and Practice
    Dr. Phil Roberts, Turbotect Ltd.
    April 1999


    Coatings for Stationary Gas Turbines
    Peter A. Huber, Turbotect Ltd.
    March 1999, Fuzhou, China


    The Institute of Mechanical Engineers (IMECHE; CCGT-5)
    Gas Turbine Compressor Washing – Review and State of the Art Technology
    Jean-Pierre Stalder, Turbotect Ltd.
    October 1998, London, England


    Review of Gas Turbine Fuel Treatment
    Rudolf Zubler and Jean-Pierre Stalder, Turbotect Ltd.
    June 1998, Shenzhen, China


    Gas Turbine Compressor Fouling - Phenomena and Remedy
    Jean-Pierre Stalder, Turbotect Ltd.
    June 1998, Shenzhen, China


    Transactions of the ASME "Journal of Engineering for Gas Turbines and Power", Volume 123, April 2001, page 363 to 370 (ASME Paper 98-GT-420)
    Gas Turbine Compressor Washing
    State of the Art - Field Experiences

    Jean-Pierre Stalder, Turbotect Ltd.
    June 1998, Stockholm, Sweden
    This paper was selected by the "IGTI - International Gas Turbine Institute, The American Society of Mechanical Engineers" as recipient for the "1998 John P. Davis Award".
    The award was presented at the 45th ASME Gas Turbine and Aeroengine Technical Congress, Exposition and Users Symposium; ASME TURBO EXPO 2000 Land, Sea and Air, 8-11 May 2000 in Münich, Germany.
    The award recognizes gas turbine application papers which are judged to be of exceptional value to those supplying or using gas turbines and their support systems. This paper was judged by the IGTI/ASME award committee as an excellent contribution to the literature of gas turbine engine technology.


    ASME Paper 98-GT-416
    Influence of Axial Compressor Fouling on Gas Turbine Unit Performance
    Based on Different Schemes and with Different Initial Parameters

    A. P. Tarabrin, Polzunov Boiler and Turbine Research Institute, NPO CKTI, St. Petersburg, Russia
    V. A. Schurovsky, Gas Research Institute, VNIIGAS, Moscow, Russia
    A. I. Bodrov, Turbotect Sankt-Petersburg Ltd.
    J.-P. Stalder, Turbotect Ltd.
    June 1998, Stockholm, Sweden


    Gas Turbine Compressor Fouling - Phenomena and Remedy
    Jean-Pierre Stalder, Turbotect Ltd.
    June 1997, AIM, Liëge, Belgium


    Transactions of the ASME "Journal of Turbomachinery", Volume 120, April 1998, page 256 to 262 (ASME Paper 96-GT-363)
    An Analysis of Axial Compressor Fouling and a Blade Cleaning Method
    A. P. Tarabrin, Polzunov Boiler and Turbine Research Institute, NPO CKTI, St. Petersburg, Russia
    V. A. Schurovsky, Gas Research Institute, VNIIGAS, Moscow, Russia
    A. I. Bodrov Turbotect Sankt-Petersburg Ltd.
    J.-P. Stalder, Turbotect Ltd.
    June 1996, Birmingham, England


    ASME Paper 94-GT-436
    Compressor Washing Maintains Plant Performance and Reduces Cost of Energy Production
    Jean-Pierre Stalder, Turbotect Ltd.
    and Peter van Oosten, UNA, Utrecht, NL
    June 1994, Den Haag, The Netherlands
    (October 1994, TMC Kuala Lumpur, Malaysia)


Turbotect: Leaders in gas turbine compressor cleaning and fuel treatment
Copyright © Turbotect Ltd.